Description

The patented EZ-RJ45® Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. This reduces the distance between the wire twists and contacts improving performance!

For best termination results, use our Heavy Duty Crimping Tool so that the conductors will be cut evenly and make full contact with the pins.

Note: Available as (1) piece or packs of (50) or (100) pieces.

• Thru holes allow wire pairs to be inserted thru front of connector for faster terminations
• Works with solid or stranded wire 24-23 AWG
• Simple one piece design...no bars or liners
• EZ to verify wire sequence
• Max Cable OD: 6.09mm (0.240"), Max Insulation Diameter: OD: 1.016mm (0.040")
• FCC, RoHS compliant
• UL rated

RJ45 is a standard type of connector for network cables, which is usually used for data transmission. RJ45 connectors are most commonly found in applications such as to connect computers onto Ethernet based networks.